Posted on Leave a comment

How to Make CBD Oil: Ultimate Guide

How to Make CBD Oil

CBD can be used in an impressive range of ways nowadays- CBD Gummies, Creams, Bath Bombs, and a lot more. However, all of these CBD-infused products start with the extraction of CBD into CBD Oil. CBD Oil is usually available as a standalone product, mixed with a carrier oil to make CBD Tincture. However, while you can buy CBD Oil online or in various stores across the country, you can also make CBD Oil.

If you enjoy CBD and want to make CBD products yourself, then making CBD Oil at home is a fun and rewarding experiment. It doesn’t take too long and it’s surprisingly simple. Of course, you won’t end up with the same kind of premium, pure CBD Oil that’s made in labs, but you can still get perfectly good CBD Oil to use in whatever way you wish.

You can use your CBD Oil via sublingual absorption or take your D.I.Y. project further and infuse it into Edibles, Drinks, Topicals, and other homemade products. Whichever way, it’s a great way to end up with a healthy dose of homemade CBD for cheap. Here’s the ultimate guide on how to make CBD Oil with everything you need to know.

What Is CBD Oil?

CBD Oil is extracted from hemp and cannabis plants. It’s a liquid product that’s rich in cannabidiol- a chemical compound or cannabinoid found in these plants. Although cannabis contains over a hundred cannabinoids, CBD has become extremely popular in recent years due to research which shows it can affect the body in various ways.

It’s important to note that CBD will not get you high. THC is the psychoactive cannabinoid in cannabis which delivers the intoxicating effects it’s known for. However, CBD is completely non-psychoactive and won’t give you any kind of psychoactive effects when consumed. However, it’s become popular as an alternative to marijuana in medical cannabis programs.

You can find CBD Oil infused into many products. For example, you can get CBD-infused Gummies, Chocolate Bars, Drinks, Creams, Bath Bombs, Soap, and so much more. These are usually made with hemp, which contains high levels of CBD with less than 0.3% THC. As such, these products are legal and safe to use in the United States.

You can also find hemp-derived CBD Oil in many health stores and specialist hemp shops. It’s not a medical product and there’s no guarantee it can help with your symptoms. However, many users find CBD therapeutic as a herbal supplement. Many users also use it daily, much in the same way you’d take a multivitamin or fish oil for a range of potential benefits.

Why Make CBD Oil?

CBD Oil is now widely available in the United States. Medical marijuana patients can find CBD Oil in dispensaries and regular consumers can legally buy hemp-derived CBD products in all kinds of stores or online. So why make CBD Oil yourself?

Why Make CBD Oil

Although you can buy CBD Oil, making CBD Oil can be a rewarding project for anyone who enjoys using it. It’s fairly simple and straightforward and helps you better understand how the product is made.

There are also many things you can do with it. You can get creative with CBD Oil and make homemade CBD Edibles or Topicals. You can also experiment with your carrier oil or add flavorings to make your CBD Oil taste better.

The chances are, your CBD Oil won’t be quite as pure and high-quality as professionally-made CBD Oil. But that doesn’t mean it’s not worth it. You can make homemade CBD Oil for cheap and it can still work effectively.

You’ll need to spend a little time and effort, but the process is fairly straightforward and there are multiple ways to create homemade CBD Oil. Plus, you can make as much as you want to keep and use in various ways.

What You Need To Make CBD Oil

Before you start making CBD Oil at home, you’ll need a few things. Most importantly, you’ll need your flower product to extract CBD from. Users in legal marijuana states can use all kinds of high-CBD strains of cannabis, such as AC/DC, Charlotte’s Web or Harlequin. However, these will also contain some THC. The best approach is to use hemp.

Hemp is federally legal in the United States thanks to the 2018 Farm Bill. As such, you can legally buy as much hemp flower as you want. Since hemp contains high levels of CBD with trace levels of THC, it’s perfect for extracting pure CBD Oil. You can even buy hemp seeds and grow hemp plants yourself. However, buying hemp flower is a much more convenient option.

Along with your Hemp, you’ll need a few basic things. What you’ll need depends on the method you’re using to make CBD Oil. The oil method is the simplest method, which requires a carrier oil such as Coconut or MCT Oil, a double boiler, and some glass containers for storing your CBD Oil.

You can also use the alcohol method. This doesn’t require a lot of equipment either, but you’ll need a double boiler, containers, and some high-proof alcohol such as 99.5% ethanol. You’ll also need a straining big to strain your CBD Oil.

Whichever method you choose, you’ll also need to decarboxylate your hemp flower first. This process involves heating it on a low heat in the oven (around 220°F) for 90-120 minutes. Decarboxylation converts the CBDA in hemp to CBD, activating the chemical and making it ready to extract and use.

How To Prepare Your Hemp

The main ingredient you need to make CBD Oil is hemp or cannabis. Buying hemp flower is the best option as its naturally high in CBD and low in THC. It’s also widely legally available, even in states where marijuana is illegal. However, you can use high-CBD strains of cannabis if you’re in a state where marijuana is legal and don’t mind your oil having THC as well.

Before you extract and infuse your flower into oil, you’ll need to decarboxylate it. Initially, hemp plants are full of CBDA, a chemical that’s converted into CBD when heated. Decarboxylation involves slowly heating your hemp to activate the CBD so that it works on your body when consumed.

How To Prepare Your Hemp

Fortunately, the process of decarboxylation is very easy. Take a baking tray and cover it in parchment paper. Spread out buds of dried hemp flower, making sure to keep them separate from each other. Put the tray in an oven preheated to around 220°F for 90-120 minutes. After this time is up, you’ll be left with hemp that’s high in active cannabidiol.

How To Make CBD Oil

Once you have your decarboxylated hemp and the equipment that you need, it’s time to make CBD Oil. There are multiple methods of making CBD Oil, but the best method of making CBD Oil at home involves using a carrier oil and a double boiler (or two pots which can fit one inside the other). Here’s how to make CBD Oil yourself.

What You Need:

  • Decarboxylated ground hemp flower
  • A double boiler
  • A baking tray and parchment paper
  • A carrier oil (Coconut Oil is best)
  • Cheesecloth or strainer

Step 1: Before you start, make sure you decarboxylate your hemp- this will activate the CBD and prepare it for use. Put a pot of water on your stove and heat it to the point that it simmers without boiling.

Step 2: Put another pot (or the top of your double boiler) into your pot of simmering water. Keep your stove on low heat and apply your hemp and carrier oil to the top boiler. Coconut Oil or MCT Oil is the best carrier oil to use due to the high content of healthy fats. Use around 16oz of carrier oil for each ounce of flower you use.

Step 3: Leave the ingredients in your boiler to simmer for around 2-3 hours at low heat, stirring occasionally. This allows time for the CBD to be extracted from the hemp. You’ll be able to tell when your CBD Oil is ready as the flower will turn into a brownish-green color.

Step 4: Once your oil is ready, strain it into a container (such as a glass Mason jar) using a cheesecloth or strainer to separate the oil from the rest of the plant material. Keep your container in a cool, dry place.

How To Make CBD Oil (Alcohol Method)

Another simple way to make CBD Oil involves using high-proof alcohol such as ethanol or ethyl alcohol. Make sure you use food-quality ethanol as others have harmful contaminants. This method involves mixing your flower with alcohol and then evaporating the alcohol. Here’s how to make CBD Oil with the alcohol method.

What You Need:

  • Decarboxylated ground hemp flower
  • High-proof alcohol (ethanol works best)
  • A straining bag or sieve
  • A double boiler
  • A storage bottle or jar

How To Make CBD Oil with Alcohol

Step 1: Make sure you’ve decarbed your flower first, this will activate the CBD. Put your decarbed flower in a bowl and cover it with your alcohol. Stir the mixture for about 6 minutes. This will bring the oil out of the flower.

Step 2: Use a straining bag or sieve to separate the oil from the rest of the plant matter. Squeeze as much as possible out and repeat the process as many times as you need to.

Step 3: Put a double boiler on the stove on low heat which will allow the oil to simmer without burning, Add the oil you’ve extracted and wait until it begins to bubble. The alcohol will evaporate and you’ll be left with CBD Oil.

Step 4: Store your CBD Oil in an airtight bottle or jar and keep it in a cool, dry place. You now have a stash of CBD Oil that’s ready to use.

How To Use Your CBD Oil

After making CBD Oil, you have many choices for how to use it. You can use CBD Oil as a standalone product or you can infuse it or mix it into foods, drinks, and other products for a more enjoyable method of consumption.

The simplest way to take CBD Oil is via sublingual absorption. This involves using a dropper to apply a few drops under your tongue and holding it there for 30-90 seconds. The cannabinoids will be absorbed into your system fast where they’ll interact with your endocannabinoid system.

Another popular method is to infuse CBD Oil into foods. It mixes particularly well with liquids, so you can add it to sauces, soups, stir-fries, and many other foods. You can also simply sprinkle it on top of your food. Keep in mind that you shouldn’t burn CBD Oil, so don’t add it to your food while you’re cooking.

You can also mix drinks with CBD Oil. For example, add some to your morning coffee or tea and stir it in. You can also add it to smoothies and juices for an extra kick. You can even make cocktails with CBD. The possibilities are pretty much endless here.

Some users even mix some CBD Oil into vape juices, although too much can make it too thick to vape. Whichever way you decide to use it, CBD Oil is highly versatile and there are plenty of methods of consumption you can use successfully.

Where To Buy CBD Oil

Although it’s easy to make CBD Oil yourself, buying high-quality, readymade CBD Oil is the best option for most users. JustCBDStore offers premium, lab-tested CBD Oils that are ready to buy and consume. All of these products are safe to use and legal to buy.

Where To Buy CBD Oil

Coconut Oil Tincture is a great option for those who want high-quality, easily-absorbable CBD Oil. You can also use Liquid Honey Tincture or Full Spectrum CBD Tincture. All of these options are safe and effective.

Plenty of other options are also available. Whether you prefer the enjoyability of CBD Gummies or the convenience of CBD Pain Cream, there’s an option suitable for you.

Conclusion

If you don’t mind putting in a little time and effort, you can make CBD Oil right from home. All it takes are some basic pieces of equipment and some hemp flower. However, if you don’t want to go to the trouble, there are plenty of high-quality CBD Oils ready to buy online at JustCBDStore.

Leave a Reply

Your email address will not be published. Required fields are marked *